Magnetic shuttering solutions for precast concrete formworks
The precast concrete magnet is a high-tech approach for fixed formwork casting beds. They are made of NdFeB magnets, which have a high magnetic attraction. The magnetic part of the shutter magnet is designed to be layered with steel flux to increase the contact area. The shell surrounded by iron or steel can protect against damage, and the steel can be used in the bolt housing of the neodymium magnet. Buy now! |
Buy Shutter Magnets
Precast concrete magnet shuttering magnets shutter magnets are a useful and a high tech method of fixing formwork to the casting bed. They are made from rare earth neodymium magnet, which give higher pulling-off force than other magnetic materials. The shutter magnets are designed so that the magnetic portion is layered with steel to spread the magnetic flux to increase the contact area. Housings surrounded with magnet can protect against damage, and the steel may be used to bolt a housing to the neodymium magnet.
The precast concrete magnets has been searching for a more economical and efficient formwork method. In the past, some conventional magnets were used to position and fasten the formwork, but considerable mechanical loads with a hammer were required, which was easy to damage the magnets and the surface of the expensive formwork tables as well. In order to facilitate the formwork activities, GME is developing and manufacturing our own shuttering magnet to solve this problem successfully.
Our shuttering magnet provides quick operation leading to improved efficiency when setting out and breaking down the formwork. It consists of a switchable neodymium magnet unit and a steel casing which forms a certain designed magnetic circuit. By pressing the button on top of the steel casing, this magnetic force is activated so that this shuttering magnet can fasten the formwork to the steel table tightly. In a deactivated mode, by means of two threaded holes integrated on the top, the neodymium magnet inside is easy to position and can be equipped with various adapters, which provide unlimited options for use.
Characteristics
- Use with wood or steel formworks
- Easy to operate
- Simple and exact positioning
- Adhesive force ranging from 450 Kg to 2100 Kg
- Avoid welding or bolting to the formwork table therefore preserving surface finish
- Same magnet can be used for different purposes
- Integrated threaded holes to adapt formwork
- Adapters to be custom made
|
ITEM |
SIZE(cm) |
Net Weight(kg) |
Box material |
Full Force （kg） |
|
MS-450 |
17*6*4 |
2 |
Iron |
≥450 |
|
MS-600 |
17*6*4 |
2 |
Iron |
≥600 |
|
MS-600p |
17*6*4 |
2.5 |
Iron |
≥600 |
|
MS-800 |
19*10*4 |
2.6 |
Stainless |
≥800 |
|
MS-900C |
28*6*4 |
2.7 |
Iron |
≥900 |
|
MS-900S |
28*6*4 |
4.2 |
Iron |
≥900 |
|
MS-1000 |
20*9.5*4 |
2.7 |
Stainless |
≥1000 |
|
MS-1350 |
19*10*4 |
3 |
Stainless |
≥1350 |
|
MS-1800 |
32*9*6 |
6.3 |
Iron |
≥1800 |
|
MS-2100 |
32*12*6 |
7.2 |
Iron |
≥2100 |
|
MS-2300 |
32*12*6 |
7.8 |
Iron |
≥2300 |
Technical drawing for reference:
Application of Precast concrete magnet shuttering magnets shutter magnets
Care should be taken when using the shutter magnets to ensure the base is clean and free from debris; otherwise the debris causes a loss of strength due to a large air gap between the magnet and the machine or tools.
the precast concrete has been formed into a new green commercial mold to site-cast concrete. It's already being applied in a wide range of walls, floors and even roofs from private house to a giant building with much more durability, flexibility and of course economically.
Buy Shutter Magnets at Magnosphere and get a better deal!
Magnosphere produces magnets at great prices, produced and delivered on time for all areas of industry, automotive, aerospace, electronics as well as in the design sector, trade fair construction, offices and for the home.
We are an ISO certified shop and carry the Trusted Shops seal. We have successfully completed more than 400,000 orders and offer our ever-growing customer base 24/7 customer service.
All items are available for immediate delivery in large numbers with daily dispatch. Our selection is your win! Thousands of satisfied customers! Buy from a company with the highest quality standards and customer service with flexible and diverse payment options and conditions.
We can also custom manufacture these to fit your exact specifications using our in-house global manufacturing facilities and team of experienced engineers. Need high quantities of magnets at the lowest and fairest price possible? Just let us know what you are looking for and contact our Customer Care Team by sending us a request for quote! We'll work with you to determine the most economical way of providing you with what you need.
Trust in our experience and convince yourself of our service and our products and we look forward to welcoming you to our magnet shop at Magnosphere. You are welcome to contact us by eMail: info(at)magnosphere.co.uk. Available 24/7 x 365 and we are also there for you on public holidays! Or just give us a call.
ROHS-Directive
Magnosphere conforms to the RoHs directive and the Reach and PFOS regulations. Directive 2002/96 / EC of the European Parliament and of the Council, of January 27, 2003, on waste electrical and electronic equipment (WEEE).
- Hotline:+49 (0) 2241 959450
- Telefax: +49.2241.9594520
- eMail: info@magnosphere.co.uk
We are very proud to offer excellent customer service. We know that without our clients, we would not be here. If you have any questions about your order or something else, please call or email us!: info(at)magnosphere.co.uk
24 / 7 x 365 Including holiday periods! Our customer service team is available to help you!