Magnetic Cable Tie Mount Stainless Steel Neodymium 26 mm x 23 mm x 6,3 mm - holds 20 kg

are made of stainless steel, which makes them resistant to chemical substances, acids, cold and high temperatures

can be easily processed with pliers or, in the case of larger quantities, with a cable tie tool

"Over 300,000 satisfied customers"

These magnetic ferrite cable holder cable ties 26 mm x 23 mm x 6.3 mm are made of stainless steel, which makes them resistant to chemical substances, acids, cold and high temperatures. Our stainless steel cable ties can easily be processed with pliers or, for larger quantities, with a cable tie tool for steel cable ties. This automatically cuts off the protruding end when the set tension is reached, thereby ensuring a reliable and even fixation of the steel cable ties.

These magnets eliminate the need for drilling or gluing when installing cords or cords and allow you to attach, remove and relocate cords instantly, saving significant time in office, retail and workshop retrofits. Each magnet can support 6.1kg of weight in a vertical position against a steel surface and is supplied with a black 4.7mm wide cable tie. In addition, the stainless steel shell gives the magnet increased corrosion resistance.

This product is commonly used in applications where immediate fixation is required. It can be attached and removed without additional equipment, greatly reducing downtime and labor. One example where our magnetic cable tie mount comes in handy is with steel containers where magnets can be used to hold lights, display signage and create storage. Visit our here.

Product features

• Magnetic Cable Tie Mount Stainless Steel Neodymium 26 mm x 23 mm x 6,3 mm - holds 6 kg
• Neodymium magnet 26 mm x 23 mm x 6.3 mm
• Saddle clip 15mm x 10mm x 5mm
• Adhesive force 20 kg
• Material Steel
• Item Weight 50 g
• Temperature -35 to +85 degrees Celsius
• Zipper style
• Closure type Magnetic

Details

• Clamps to steel surface creating a strong fixing point for cables and wires, even on a curved surface
• Instantly transferable and reusable
• No Drilling or Adhesives
• 26 mm x 23 mm x 6.3 mm thick ferrite magnet with a 15 mm x 10 mm x 5 mm saddle clip
• Attach the zip tie to an object so you can hold it magnetically
• Supplied with one 4.7mm wide cable tie per magnet
• Operating temperature -35 to +85 degrees Celsius
• The north pole of the magnet is in the middle of the magnet surface
• South pole on the outer edge of the steel shell

Note on adhesive force

The adhesive forces determined by us were determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm with the magnet pulled off vertically (1kg~10N). A deviation of up to -10% compared to the specified value is possible in exceptional cases.

Classy look and high-quality material

Thanks to the elegant look of our Magnetic Cable Tie Mount Stainless Steel Neodymium 26 mm x 23 mm x 6,3 mm, they can be placed where they are clearly visible.

REACH RoHS Directive

This article complies with the European RoHS directive (2002/95/EG - RoHS - Restriction of Hazardous Substances) for the restriction of the use of certain hazardous substances in electrical and electronic equipment. Corresponds to the European RoHS directive, is PVC and plasticizer-free and REACH-compliant - classified according to the German flame retardant standard DIN 4102 / B1